PDA

View Full Version : Thermoplastics


  1. Balloon blowing
  2. Yield Strains as a function of temperature
  3. True stress/strain data for PEEK polymer
  4. Experimental Data for Thermoplastics
  5. material models for hard plastics
  6. model for pa 6.6
  7. Need help with experiments
  8. POM (creep kernel)
  9. FEM simulation of Polypropylene / polypropene (PP) and PET
  10. PA 6 Glassfiber
  11. the toughening mechanism of epoxy matrix with nylon particle
  12. Need help with Prony series
  13. Please help me with "Prony Series"
  14. Properties of acrylic damping polymers?`
  15. fatigue calculation for thermoplastic materials
  16. PA 6 GB20GF10 - which tests?
  17. FEA for LMDPE (Linear medium desnsity polyehthylene)
  18. How Can I Get Appropriate Strain-rate Level in the Drop Test?
  19. PA for offshore pipes
  20. MAterial parameters for Glasfiber reinforced plastic
  21. Blow molding in Abaqus
  22. Fatigue of Dyneema/PU composite with carbon/epoxy reinforcement strip
  23. Cyclic load on POM
  24. Nano-composite model for semicrystalline polymer?
  25. modelling composite thermoplastic
  26. Abaqus Model PA 6.6
  27. The hydrophobic peek.
  28. Polypropilene data
  29. Fatigue SN table in ansys
  30. one Q about structure analysis for PET bottle
  31. Modeling POM
  32. Material Properties
  33. thermoplastic acetal copolymer
  34. Modeling of a PPO+PA blend
  35. Modeling HDPE behaviour
  36. Influence of moisture content on creep behaviours of polymers
  37. FEM Simulation of elastomer modified PA 6
  38. Thermoplastic for Blow Forming
  39. Material Properties
  40. data materials
  41. Best model for ABS impact loading
  42. Design of PET preforms and blown simulation
  43. Abaqus Thermoplastics polypropylene
  44. ABS: resonances for linear model and non-linear model
  45. Abaqus Thermoplastics polypropylene
  46. PP Abaqus
  47. polyprophylene Abaqus
  48. Creep
  49. Help with Drucker-Prager parameters
  50. Choice of the analysis for stress relaxation of PBT in real time scale
  51. Tensile modulus of polymers
  52. PVC based sealing
  53. Material Model For Isoplast-2530 by Lubrizol
  54. Methacrylate post-relaxation behavior
  55. Snap-Fit - Material selection for fatigue
  56. Material model for thermoplastic elastomers
  57. PTFE Seals on ABAQUS
  58. a bingham plastic
  59. Material model for HPDE
  60. Stress Relaxation On Abaqus
  61. Difference of stiffness in compression stress between tensile stress
  62. Tensile, compression, & flex testing?
  63. which failure model in abaqus for pa66 material ?
  64. Correlation Curves PP Abaqus
  65. Creep PMMA ANSYS 13.0
  66. Thermoplastic creep test