- FEM of a polymer fluid: deborah number?
- convergence problem in micromechanical model calculation
- what material model is appropriate for polymer hydrogel
- Help on ABAQUS UMAT subroutine
- LS-DYNA material model for ULTEM ATX-100
- WHAT IS BIG DIFFERENCE BETWEEN ABAQUS AND LSDYNA IN SIMULATI
- ANSYS material model for PMMA around its Tg
- Remesh in Abaqus/Standard: how to get 3D geometric part?
- Riveting analysis with sealant
- amar1
- rigid thermoplastic absorbable polymer modeling
- WLF shift function
- a question about UMAT
- Remeshing on Abaqus\Standard
- Importing between Explicit and abaqus
- One more explicit question
- quasi-static analysis
- Ogden
- quasi-static analysis results
- Ansys FEA modeling of 15% glass reinforced ABS plastic
- quasi-static
- ABAQUS Umat question
- How can the long term modulus be negative?
- how can the cooling process change the stress relaxation?
- WLF function in Marc
- how to write stress-dependent model
- Soccer Ball Modelling
- element deletion/Nucleation
- Novice's question on UMAT in Abaqus
- A important question
- Ansys elastomer's characterization
- Models for EDPM
- Tire Modelling
- Contact with friction
- SUBROUTINE FRIC
- Thermoplastic FEA with ANSYS, flexural test correlation
- Analytical Rigid Part
- Polymer FEM newstarter
- Newbie: UMAT and incompressibilty
- EPDM and ls-dyna
- UMAT DFGRD0-1 and ELEMENT
- newbie question: strains in UMAT
- Tensile Test Modeling in LS-Dyna
- Negative Eigenvalues
- Convergence problems with *HYSTERESIS
- creep modelling of plastics using LS-DYNA
- Newbie: elastomer modelling for pump. Looking for input
- Cable element
- Rubber component for vibration elimination
- different abaqus version behavior
- Hyperelasticity - Traction Boundary Condition
- Rubber Bushing in Ansys
- Vibration Analysis
- ANSYS viscoelastic curve fitting
- Ansys Modeling of Flexural 4bar mechanism
- PROBLEMS WITH UMAT, negative eigenvalues etc.
- Queue or system filesize limit exceeded
- Testing a UMAT for biological tissue
- Is there anyway to modify abaqus internal material model?
- Problem with writing to a file from Subroutine-UMAT
- Abaqus HYPERFOAM Material Model Parameters
- SI units in FEM analysis
- material properties for butyl rubber
- Sample Subroutine for updating the material properties
- Parallel network models
- UMAT -Data retrieval
- Viscoelasticity of a hydrogel
- EL PRINT or NODE PRINT COMMAND RESULTS IN .DAT FILE - ABAQUS
- Parametric Analysis with Uhyper-ABAQUS
- How to utilize Hyper74 or Hyper84 modeling torsion in ANSYS
- Fatigue Analysis in ANSYS 9.0 - SN Curve for Delrin
- material parameters in druckerprager model?
- A phase mixture model of a particle reinforced composite
- Help in Updating the variable in a UMAT
- question regarding the coding in python
- Abaqus slow convergence
- Characteristic values and computation fibers
- help in linking user subroutine with design
- the error (LINK.exe) while executing the user subroutine
- question regarding the updating a user variable
- Notation for number of elements in UMAT
- error LNK2005: _CREEP
- VUMAT
- NEO HOOKEAN
- how to design a model with multiple properties and UMAT
- can i implement two UMAT's in one subroutine
- failure theory for polymers
- Newbie qustions on abaqus' user subroutine
- remeshing on abaqus/standard
- ABAQUS Explicit question
- a question about *USDFLD.
- Basic VUMAT question
- ABAQUS viewer question
- Stiffness tensor in UMAT
- how to link fortran program with abaqus
- Material model for PMMA
- ABAQUS UMAT getting hung up (no error message)
- Total Force calculation in ABAQUS
- data for ABAQUS' hyperelastic models
- Which Element type to take for electroactive polymers??
- Abaqus on Linux Cluster and Illegal Memory Reference.
- Question about abaqus user subroutine
- Fortran
- VUMAT and *INITIAL CONDITIONS
- Viscoelastic Parameters for Dytran
- UMAT help: Deformation graadient
- large deformation case question
- Newbie's qustion about ABAQUS User Subroutine UMAT
- error LNK2005 with UMAT
- error in UMAT: Function call help
- deformation gradient vs stran
- NANQ in DFGRD1
- ABAQUS VUMAT for shell element
- CAD/CAM/CAE Tutorial Download
- Anybody familiar with Boyce mode
- next iteration values
- extract data from abaqus .odb file
- Vibration Analysis of A Block on Rubber in ANSYS
- Rubber FEA
- Linear and non-linear viscoelastic modeling using UMAT
- a viscoelastic polymaer and a polyurethane material
- Auto-Remeshing in Abaqus?
- ABAQUS SYMMETRIC MODEL GENERATION
- Explicit restart files
- Viscoelastic material model in Algor
- *Elastic and *Viscoelastic for prony series in Abaqus
- Viscoelasticity in ABAQUS
- how to link fortran codes to abaqus
- Periodic boundary conditions in ABAQUS
- conversion between shear and young's moduli
- Export of deformed mesh geometry from ABAQUS
- Need help in using Intel Fortran with ABAQUS V6.6
- Viscoelasticity in Ansys
- FEM surface definition
- Problem of running a file in fortran UMAT
- visco-elasto-plasticity in Abaqus
- ANSYS/LMATRIX
- abaqus v6.5 (periodic boundary condition and NSET)
- Help needed : How to weld two nodes together in ABAQUS
- FEM modelling of MEMS cantilever surface
- Calculate inductances
- ABAQUS vs ANSYS
- Pyonting Effect and ABAQUS
- Cauchy stress/strain conversion
- Boundary condiations in inclined cylindrical coord. system
- Extrapolation of Gauss points
- How to define stress-dependant surface tractions ?
- Need help : Hyperelastic+Hyperfoam+Viscoelatic material
- ABAQUS umat with large rotations
- Problem in compiling and linking umat
- Has anyone seen this error when running umat?
- Need help: odd problem about STATEV in umat
- Damage mechanics
- modelling of microstructured elastomer deformation
- *HYSTERESIS and/or *VISCOELASTIC
- modelling an isotropic 3d porous foam using periodic boundry
- How to model rubber (with damping) in ABAQUS ?
- Updated Lagrange formulation
- Bauschinger effect with ABAQUS
- Viscoelastic simulation with uniaxial compression data
- Vibration in Ansys
- modal analysis and pin insertion
- Save as txt
- help in vumat
- Another thread for Intel Fortran
- help on ABAQUS energy output
- Help:changing material properties in abaqus using Fortran95
- Problem in ANSYS
- Odd UMAT problem
- Input files and vibrations
- Machine vibrating on a table
- DISP. CORRECTION TOO LARGE COMPARED TO DISP. INCREMENT
- Modal analysis with gf-reinforced pa?
- Dilation angle in Abaqus Drucker Prager model
- Viscoelasticity parameter differences between Abaqus & A
- Join and support in Ansys
- Question about VUMAT (Mulliken Boyce model)
- [b]Which software ABAQUS, ANSYS, NASTRAN, Multilayer materia
- writing onto .dat file in VUMAT using Compaq Visual Fortran
- Components of defgradNew
- Parametric study with umat using ABAQUS
- Weight in Ansys
- Software suggestion
- How to put temperature for Viscoelastic analysis in Abaqus?
- det(Fp) == 1 ??
- What is the difference between these two steps?
- Displacements and loads
- Periodic BC in Ansys
- Boundary condition for rotating part
- ABAQUS - material models
- Question about approach for DDSDDE calculation
- mesh convergence
- polymer property
- Fortran subroutine for ABAQUS V6.6
- XP vs Linux versions of ABAQUS
- polymer membrane modeling
- Rubbery materials in NASTRAN
- uniaxial compression modeling
- How to combine the porous material with a umat?
- compression simulation in Ansys
- compression simulation in ansys------ continue
- Interaction warning message
- Total form constitutive laws
- ABAQUS under unix
- problem with large jobs :: Fp and mass scaling
- Pressure in Ansys
- Finite element modeling of truly incompressible material
- umat for abaqus membrane element m3d4
- compression co-efficient of hyperelastic material
- Regarding Sliding Wear simulation in Abaqus for a PTFE Seal.
- nlgeom and master degrees of freedom
- Golf Ball Viscoelasticity and Hyperelasticity
- Material Definition from Stress-Strain Curves
- Solution methods for solving nonlinear systems
- UMAT: modeling 2 materials
- Mullins effect for Abaqus
- Creep behaviour of Polyethylene
- Bone remodelling after Total Hip Replacement
- Viscoelastic properties of Polyethylene
- viscoelastic model convergence problems in ABAQUS
- Hysteresis in ABAQUS (for a golf ball impact)
- Simple Tension Validation
- UMAT For Progressive Damage
- User-Defined Strain Energy Function + ABAQUS
- creep behaviour of adhesives in bonded joints
- Problem in compiling Fortran UMAT
- System Error in ABAQUS
- Viscoelastic properties of an alginate microsphere
- Abnormal Termination Error
- Neo-Hooken VUMAT question
- field output in element coordinate system
- problem with ABAQUS Python script
- Simulation of EPP material
- hysteresis effect
- One Question about Mulliken Boyce Model
- How many types of data can be added to 1 material in ANSYS?
- Element deletion in ABAQUS/Standard and Explicit
- Plotting density contour in ABAQUS
- Abaqus Vumat with compostie shell element
- simulates with LS-DYNA
- modelling a hysteresis/viscoelasticity
- Transmissibility of vibration isolation
- Incompressibility in VUMAT
- How to define this Boundary Condition?
- Output question
- Element deletion using VUMAT/DEPVAR option
- Ansys hyperelastic + viscoelastic material trouble
- evaluate hyperelastic material
- Failure models for PC
- Coding Faliure Criterion